Brand: Ay Up Lighting Systems
Product Code: SLB-01 CELL ASSEMBLY
Availability: In Stock
Price: AU$27.50
Ex Tax: AU$25.00
Qty:   Add to Cart
   - OR -   


  • Replacement 2000mAh (14.8Wh) 7.4V Protected Lithium Ion Polymer Cell Assembly
  • Rechargeable Lithium Ion Polymer cell assembly - 2000mAh
  • Serviceable by us or by you
  • One year warranty
  • Can be charged with any of our new or old chargers

Cells are shipped with only 40% charge. Place your batteries on the charger and fully charge before first use.

Purchase our Charging and Storage Wallet here


Technical Specifications

The capacity of the battery is 2000mAh and its chemistry is Lithium Ion Polymer with no memory. The batteries are waterproof, rechargeable, have integrated protection circuit, short circuit, over voltage protection, low voltage cut out and other smarts. The battery components are assembled into a robust serviceable casing.

Minimum burn on high = 2 1/2 hrs, Minimum burn on medium = 4 hrs, Minimum burn on low = 8 hrs, Flashing = 14+hrs

  • Capacity 2000mAh (14.8Wh)
  • 3 Light power levels, high, medium and low 
  • Flashing mode
  • Fuel gauge
  • Type - Rechargeable 2 cell Lithium Ion Polymer - Output 7.4V
  • Frame size - 86 x 50 x 29mm - Fits Large Pouch Kit
  • Protection - IC - Integrated Circuit - Short circuit, over current, under current, over voltage protection
  • Short circuit response - 15ms
  • Auto reset - No, plug into charger to test and reset
  • Auto battery shutdown - 5V
  • Casing material - ABS Flame Retardant
  • IP Rating - IP 67, Immersion - 0.5 metre
  • Cable type - Shielded 2 core, 22AWG
  • Connector type - Moulded sealed 2.1mm barrel type
  • Impact test - 5 metres to concrete floor
  • Charge at any state - No memory
  • Charge time from empty - Approx 4.5 hours
  • Normal operating temp - Ambient temp
  • Designed and assembled by - Ay Up Lighting Systems
  • Manufacture origin - Australia / PRC
  • Approvals - ultra low voltage - regulation not required
  • Warranty - 5 year replacement for circuitry and casings, 1 year replacement against manufacturers defects on battery cells, cable and button
  • Weight: 130 grams 


Batteries are shipped with approx 40% charge. Please fully charge before first use.

  • Push once to turn on
  • Push once to cycle through modes - High, medium and low
  • Push and hold for 1 second then release to turn off
  • To enter flashing mode with the battery off, push and hold until flashing
  • To exit flashing mode and to turn off, press once
  • To enter fuel gauge with light on, push and keep button pressed in
  • The light will flash - Once = Requires charging, Twice = OK, Three times = Fully charged
  • To exit from fuel gauge simply release the button and the light will return to the same power mode

Read the setup manua[here]

Read the battery safety document before you charge [here]

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Tags: Battery, B2000,